Tel: 0086-755-27964225
Fax: 0086-755-61673037
Mobile: 0086-13751045042
Email: wallis@orientracing.com
MSN: sucens@hotmail.com
Skype: orientrc
QQ: 183822088
Address:office:Room 1018,LiJing Centre Building,HengGang Town,ShenZhen City, Guangdong Province, 518115,China warehouse:D903,JinChangGe Building,JinGuanHuaCheng,HengGang Town,ShenZhen, GD, CN
Location: Home >> Products

Professional Servo tester

  • Professional Servo tester
  • Professional Servo tester
  • Professional Servo tester
  • Professional Servo tester
  • The first photo
  • The Second Picture
  • The third picture
  • The fourth picture
  • The fifth picture
LiFe Li-ion Lipo 2-8S Battery meter/monitor with Low Voltage Alarm 3 in 1 Battery Balancer with LCD Screen

Introduction

Specification

Quality

Service

Other feature

GT Power Professional Servo Tester.

Providing fast and stable test result.

G.T power tester can be powered by lipo battery through the balance charging wire adaptor or DC power supply. It is both convenient and flexible.

The rolling menu toolbar makes the operation clear and easy.

The function setting is easy and practical which covers most parameters that end users need.

The device is equipped with servo and receiver wires, which makes the measurement operation a lot easier.

The device is equipped with clear and high contrast LCD Monitor to show individual parameter and menu selection. Which assures the user will see the testing information accurately and completely.

Bigger buttons are used over the smaller ones, which proves good feedback and reduces misoperations.

Functions:
- LN Mode
This function is used to test the linearity and vibration of servo.
(This can also be used to test the linearity and vibration point of ESC)

- ED Mode
The function is used to test the endurance of servo.

- FP Mode
This function is used to test the servo's ability to neutral itself.
(If equipped on the plane, you can find out the theoretic mid-point of servo exactly)

- DB Mode
The function is used to test the dead band of servo.
(It can also be used to calculate the resolution of servo)
The test can also be used to choose the servo based on differential timing.
(This great for models like CCPM which need 3 servos for it's rotor head)

- SP Mode
This function is used to perform speed test for servo, and it allows you to choose the most competent servo based on all the parameters that is performed in the test (E.g. Reaction Time and Differential Timing).

- WP Mode
The function is used to test the ageing and life of the servo.
There are some certain reparative functions for some aquiver servos.

- PW Mode
This function is used to test the output pulse of connector and test whether there is any problem on the signal unstable of the quiver of servo.

Specification:
- Dimensions: 96x70x17.5 mm

 
GT Power Professional Servo Tester.

Providing fast and stable test result.

G.T power tester can be powered by lipo battery through the balance charging wire adaptor or DC power supply. It is both convenient and flexible.

The rolling menu toolbar makes the operation clear and easy.

The function setting is easy and practical which covers most parameters that end users need.

The device is equipped with servo and receiver wires, which makes the measurement operation a lot easier.

The device is equipped with clear and high contrast LCD Monitor to show individual parameter and menu selection. Which assures the user will see the testing information accurately and completely.

Bigger buttons are used over the smaller ones, which proves good feedback and reduces misoperations.

Functions:
- LN Mode
This function is used to test the linearity and vibration of servo.
(This can also be used to test the linearity and vibration point of ESC)

- ED Mode
The function is used to test the endurance of servo.

- FP Mode
This function is used to test the servo's ability to neutral itself.
(If equipped on the plane, you can find out the theoretic mid-point of servo exactly)

- DB Mode
The function is used to test the dead band of servo.
(It can also be used to calculate the resolution of servo)
The test can also be used to choose the servo based on differential timing.
(This great for models like CCPM which need 3 servos for it's rotor head)

- SP Mode
This function is used to perform speed test for servo, and it allows you to choose the most competent servo based on all the parameters that is performed in the test (E.g. Reaction Time and Differential Timing).

- WP Mode
The function is used to test the ageing and life of the servo.
There are some certain reparative functions for some aquiver servos.

- PW Mode
This function is used to test the output pulse of connector and test whether there is any problem on the signal unstable of the quiver of servo.

Specification:
- Dimensions: 96x70x17.5 mm

 
GT Power Professional Servo Tester.

Providing fast and stable test result.

G.T power tester can be powered by lipo battery through the balance charging wire adaptor or DC power supply. It is both convenient and flexible.

The rolling menu toolbar makes the operation clear and easy.

The function setting is easy and practical which covers most parameters that end users need.

The device is equipped with servo and receiver wires, which makes the measurement operation a lot easier.

The device is equipped with clear and high contrast LCD Monitor to show individual parameter and menu selection. Which assures the user will see the testing information accurately and completely.

Bigger buttons are used over the smaller ones, which proves good feedback and reduces misoperations.

Functions:
- LN Mode
This function is used to test the linearity and vibration of servo.
(This can also be used to test the linearity and vibration point of ESC)

- ED Mode
The function is used to test the endurance of servo.

- FP Mode
This function is used to test the servo's ability to neutral itself.
(If equipped on the plane, you can find out the theoretic mid-point of servo exactly)

- DB Mode
The function is used to test the dead band of servo.
(It can also be used to calculate the resolution of servo)
The test can also be used to choose the servo based on differential timing.
(This great for models like CCPM which need 3 servos for it's rotor head)

- SP Mode
This function is used to perform speed test for servo, and it allows you to choose the most competent servo based on all the parameters that is performed in the test (E.g. Reaction Time and Differential Timing).

- WP Mode
The function is used to test the ageing and life of the servo.
There are some certain reparative functions for some aquiver servos.

- PW Mode
This function is used to test the output pulse of connector and test whether there is any problem on the signal unstable of the quiver of servo.

Specification:
- Dimensions: 96x70x17.5 mm

 
GT Power Professional Servo Tester.

Providing fast and stable test result.

G.T power tester can be powered by lipo battery through the balance charging wire adaptor or DC power supply. It is both convenient and flexible.

The rolling menu toolbar makes the operation clear and easy.

The function setting is easy and practical which covers most parameters that end users need.

The device is equipped with servo and receiver wires, which makes the measurement operation a lot easier.

The device is equipped with clear and high contrast LCD Monitor to show individual parameter and menu selection. Which assures the user will see the testing information accurately and completely.

Bigger buttons are used over the smaller ones, which proves good feedback and reduces misoperations.

Functions:
- LN Mode
This function is used to test the linearity and vibration of servo.
(This can also be used to test the linearity and vibration point of ESC)

- ED Mode
The function is used to test the endurance of servo.

- FP Mode
This function is used to test the servo's ability to neutral itself.
(If equipped on the plane, you can find out the theoretic mid-point of servo exactly)

- DB Mode
The function is used to test the dead band of servo.
(It can also be used to calculate the resolution of servo)
The test can also be used to choose the servo based on differential timing.
(This great for models like CCPM which need 3 servos for it's rotor head)

- SP Mode
This function is used to perform speed test for servo, and it allows you to choose the most competent servo based on all the parameters that is performed in the test (E.g. Reaction Time and Differential Timing).

- WP Mode
The function is used to test the ageing and life of the servo.
There are some certain reparative functions for some aquiver servos.

- PW Mode
This function is used to test the output pulse of connector and test whether there is any problem on the signal unstable of the quiver of servo.

Specification:
- Dimensions: 96x70x17.5 mm

 
Product Name: Professional Servo tester
Item No.: OHG25
You may interested in the products related with Professional Servo tester
CCPM Servo Consistency Master / Servo tester
CCPM Servo Consistency Master / Servo tester
6S Digital battery meter
6S Digital battery meter
LiPo/LiFe Battery Voltage Checker /Analyser with Alarm
LiPo/LiFe Battery Voltage Checker /Analyser with Alarm
RC Professional Tachometer
RC Professional Tachometer
3 in 1 Battery Balancer with LCD Screen
3 in 1 Battery Balancer with LCD Screen
IC Controlled Tire Warmer
IC Controlled Tire Warmer
Simple Tire Warmer
Simple Tire Warmer
Battery capacity checker
Battery capacity checker
Battery Heater
Battery Heater
LiFe Li-ion Lipo 2-8S Battery meter/monitor with Low Voltage Alarm
LiFe Li-ion Lipo 2-8S Battery meter/monitor with Low Voltage Alarm